Samsung announced the Galaxy Note 8.0 at Mobile World Congress in Barcelona. The Galaxy Note 8.0 features a 8.0” 1280 x 800 (WXGA) display, 5 megapixel camera, Quad-Core processor clocked at 1.6 GHz, Touch-Wiz Nature UX, S Pen functions and Android 4.1.2 upgradable to Android 4.2.2. Today we give you the opportunity to test Android 4.2.2 for the Galaxy Note 8.0. This firmware is completely official. There aren’t many new things. After we flashed the firmware on our tablet, the Note 8.0 feels a lot faster and the battery life looks to be better! Try now Android 4.2.2 for your Galaxy Note 8.0!
Download the firmware here
Flashing Instructions
- MAKE SURE TO BACK-UP EVERYTHING BEFORE YOU PROCEED!!!
- Unzip the file
- Open Odin 3.07 (already included in the firmware package)
- Restart phone in download mode
(Press and hold Home + Power + Volume down buttons)
- Connect phone and wait until you get a blue sign in Odin
- Add CODE_N5110XXCMG2_1031850_REV01_user_low_ship.tar to CODE
- Add CSC_OXA_N5110OXACMG2_1031850_REV01_user_mid_noship.tar to CSC
- Add kona_wifi.pit to PIT
- Make sure re-partition is ticked
- Start flash, sit back and wait a few minutes.
- If you encounter any issues with the firmware (Any FC, Bootloop etc)
- Boot into recovery mode (Home+ Power + Volume Up)
- Choose to wipe/factory reset.
(THIS WILL ERASE ALL OF YOUR DATA INCLUDING YOUR INTERNAL SD CARD!)
- Then choose reboot and you should be good to go!
- MAKE SURE TO BACK-UP EVERYTHING BEFORE YOU PROCEED!!!
- Unzip the file
- Open Odin 3.07 (already included in the firmware package)
- Restart phone in download mode
(Press and hold Home + Power + Volume down buttons)
- Connect phone and wait until you get a blue sign in Odin
- Add CODE_N5110XXCMG2_1031850_REV01_user_low_ship.tar to CODE
- Add CSC_OXA_N5110OXACMG2_1031850_REV01_user_mid_noship.tar to CSC
- Add kona_wifi.pit to PIT
- Make sure re-partition is ticked
- Start flash, sit back and wait a few minutes.
- If you encounter any issues with the firmware (Any FC, Bootloop etc)
- Boot into recovery mode (Home+ Power + Volume Up)
- Choose to wipe/factory reset.
(THIS WILL ERASE ALL OF YOUR DATA INCLUDING YOUR INTERNAL SD CARD!)
- Then choose reboot and you should be good to go!
No comments:
Post a Comment